Poorly maintained garage doors are noisy. They are also more likely to cause accidents. Doing things like lubricating your garage door, cleaning it, and replacing any worn-out or broken parts is therefore a must for drama-free garage door operation.
Garage door springs make closing and opening garage doors easy. However, if they wear out or break, they can turn a friendly-to-operate garage door into a nightmare. What this means is that if your garage door starts acting up, it is likely an indication that you have garage door springs that need replacing. Here are garage door spring replacement tips that will make your work easier.
Replace garage door springs in sets
It is tempting to limit your garage door repair work on broken parts. However, when it comes to springs, replacing them in sets is the best way to go. The obvious reason for this is that since the springs carry almost the same weight, if the ravages of time make one of them weak enough to buckle under the weight, the others are just as likely on the brink of giving in. Replacing only one of them is more or less doing the repair work halfway and chances are that it won't be long before your garage door starts acting up again.
The other reason has to do with the effect that time has on how the springs handle pressure. Older springs are more susceptible to overstretching. Therefore, if your garage door has a mix of old and new springs supporting it, it will have balance issues – a problem that even normal spring adjustments will not be able to fix.
Release the tension on the springs
The weight that garage doors exert on springs usually puts them under extreme pressure. Any attempts at adjusting or repairing the springs when they are under tension will simply increase your chances of getting injured.
There are generally two types of springs: torsion springs and extension springs. The safest garage door state that you should use will depend on which type of springs your door uses. If you have extension springs installed in your garage door, your safest bet will be to work on the door when it is open. In this position, the extension springs are usually under the least tension. They are therefore less likely to injure you. As for garage doors fitted with torsion springs, working on the door when it is closed is not only easier but also safer. Pop over to this site for more information.